$5.25 Snap-in 10 in stock $5.25 Screw-in 6 in stock
Silicone Nose Pad Strap medium length 16mm
Here is a Silicone Strap Bridge. The purpose of the strap bridge piece is to perform like a one piece saddle bridge. This way the pressure can be let off the sides of the nose where the nose pads rest by allowing the strap to rest over the bridge of your nose. The particular nose pad strap shown here is made of soft silicone. And the available mounts for this type of nose pad is screw-in and snap-in (both shown in picture).
How this nose pad strap measures up
Nose Pad Size -- Medium to long 16mm (refers to pad length before strap) Strap Length -- 27mm long (Approx. 1 and 1/16 inches, as shown in picture) Material -- Silicone with plastic inserted mount
Eyeglass Frame Guide
Use this as a rough reference for calculating the necessary strap size for you and your eyeglass frame. We will label the actual frame measurement on the left and our suggestion on the right. Keep in mind, this is an average size to frame suggestion, and each user may vary according to nose width and user's preference of height requirement of the eyeglass frame on the face.
Eyeglass frame size (In mm) Suggested Nose Pad Strap Size
42mm -- 46mm 12mm Nose Pad Strap 46mm -- 52mm 16mm Nose Pad Strap 52mm -- 56mm 18mm and 20mm Nose Pad Strap 56mm -- 58mm 20mm and 22mm Nose Pad Strap 58mm and higher 22mm Nose Pad Strap
If you are unsure about the eyeglass frame size, you can find the number located on the inside of the bridge (nose piece, on either a plastic or metal eyeglass frame), or located on the inside of a temple (arm piece).
If you are unable to read these numbers, you can find out by taking a ruler and measuring from one side of the eyeglass lens to the other of either your right or left eyeglass lens. Below is a conversion list for those of you measuring in inches.