Air Active Nose Pads Snap-in
Specially Designed Comfort Nose Pads
Air Active nose pads are unique in the fact that they distribute weight across the pad evenly because of its air filled channel.
Although the pad may appear to have a pocket of air, it really has an open channel that allows air to pass into the pad and out again depending upon the pressure or weight applied. This meaning the weight of the frame upon the bridge of your nose. Much like a waterbed, where the water gets displaced from movement from side to side from the weight of a person.
There are only two ways an Air Active nose pad can attach to a frame. This is what we call a mount style. Or the way a nose pad mounts to a frame. They are;
For the screw-in mount listing of the air active nose pads click this link;
For many of you who have worn hard uncomfortable nose pads and wanted a change, these should do the trick. There are pros and cons though to everything, and this has no exception. While these pads should create a more comfortable eyeglass wearing experience, there should be caution placed when mounting them , and as well as normal wear and tear. They are quality pads but are not invincible. The backing on the snap-in mount air active nose pads has a polycarbonate piece that is joined in the manufacturing process. Just like many other pads, they are a two piece mold and therefore have the chance of ripping. Think of a balloon that has a hard plastic base. If you tug on the balloon enough, there is a chance that it will rip. This goes with anything that has a soft pliable material attached to a rigid surface. We are not discouraging the use of this mount style of the air active nose pads. We have offered these for years and with only a couple of cases. Yet, we just want to inform you that with proper care you can get the best life out of your nose pads.
Here we have a list of the available sizes of the snap-in mount air active nose pads;
When we discuss the sizes of nose pads, we refer to the longest section or length of the nose pads. Due to the fact that many people have requested to know the width of the pad as well, we are listing that here below.
- 13mm in length and approx. 7mm in width at widest section in a relaxed state.
- 14.5mm in length and approx. 7.5mm in width at widest section in a relaxed state.
- 17mm in length and approx. 8.5mm in width at widest section in a relaxed state.
Remember, the nose pads shown in the photo here are for the snap-in mount only, and the screw-in mount can be found in the related products shown below or through the link above.
Should you have questions or concerns, please email us, or use the phone number listed in our contact us page.