Comfortable air pocket nose pads for a specific mount only.
Special designed nose pads that take on the appearance of the Air Active nose pads, yet mount to a particular frame mount. Just as the Air Active nose pads, these nose pads have a hollow chamber in which air is allowed to enter and escape. However, the way that these nose pads are mounted is similar to that of the "System 3" type nose pads. Below the cushioned(raised bubble) part of the nose pad, you will notice a grooved section. The grooved area is the part that is going to attach to the nose pad arm, Just as the "System 3" nose pad would. The nose pad arm where the nose pad attaches should look like a teardrop shaped, flat metal piece that has a teardrop shape cutout . This is where the nose pad is inserted. The flat part of the nose pad is the part of the nose pad that needs to face towards the eyeglass lens when mounting. And the raised/ rounded part should face outward(This is the part that will rest upon the nose). These nose pads are 12mm in length (this accounts for the lipped area of the nose pad), and 7mm wide.
NOTE: This is a special application nose pad. This means that there is one particular mount that will hold this nose pad. If you are unsure of the mount you need, and seek help, Email us at email@example.com.
Also this particular nose pad is used commonly on Oakley models. Be aware that these are the same nose pads used on Oakley Feedback Oakley Tinfoil and others. There are copycat nose pads made in China that represent a similar nose pad, yet are not constructed the same as these which are made of high quality silicone from European manufacturers.