Comfortable air pocket nose pads for a specific mount only in a slightly larger size than the other Air Tech nose pads but fits over not inside.
Special designed nose pads that take on the appearance of the Air Active nose pads, yet mount to a particular frame mount. Just as the Air Active nose pads, these nose pads have a hollow chamber in which air is allowed to enter and escape. However, the way that these nose pads are mounted is by slipping these over the Air Tech nose pad arm. The difference from these and the Air Tech nose pads is that Air tech nose pads fit into the opening like a System 3 nose pad type would. The nose pads shown here have the opening on the top of the pad and is much wider allowing the opening to stretch enough to allow the pad to fit over the same pad arm that the Air Tech nose pads would pop into. The nose pad arm where the nose pad attaches should look like a teardrop shaped, flat metal piece that has a teardrop shape cutout . This is where the nose pad is inserted on Air Tech pads but fits inside the Air Tech Sock nose pad. There is no front or back to the pad and there is only one way for these to go on the frame. One could compare this to the Silhouette type pad arm that inserts into the pad. These nose pads are 12.5mm in length (this accounts for the lipped area of the nose pad), and 8mm wide. These differ from the other Air Tech nose pads by overall being a little wider and close to 1mm longer to allow the pad to fit around the pad arm instead of inside it.
NOTE: This is a special application nose pad. This means that there is one particular mount that will hold this nose pad. If you are unsure of the mount you need, and seek help, Email us at firstname.lastname@example.org.